#3 Long Neck grommets and washers, 500 pieces of each

Inside diameter: 7/16"
Flange diameter: 0.965"
Length under flange: 0.312"

Note: For special projects where your material is thicker, purchase long neck #3 grommets with a 0.312" length under the flange (length of the grommet shaft). #3 long neck grommets are longer than standard #3 grommets by 0.0837" (over 1/16"). Do not buy long neck brass grommets if you do not need them. If the grommet is excessively long for your material then it will not set tightly or you will have to use a second washers as a spacer.

The #2 "high-hat" long neck grommets are still the ones we offer with the longest neck. You can see the #2 long neck grommets by visiting this link. #2 long neck grommets have a shaft length under the flange of 0.354" (just shy of 3/8'') which is 0.042" (over 1/32") longer than the #3 long neck grommets
Please choose the most appropriate long neck metal grommet for your project.

You can apply the ClipsShop #3 self piercing metal grommets with the following ClipsShop machines:
CSTEP-1
CSTEP-2
CSTON-1
CSBUR-1
CSPIC-2
CSPIC-3

Note: Our ClipsShop brand grommets fit our ClipsShop brand dies. They have also been known to fit on certain Micron and Stimpson dies. Micron calls 7/16" ID grommets a #3. If you have an existing Micron #3 die then you should order our #3 grommets to fit it. If you plan on using our grommets with a different brand of machine, we suggest you request free samples for testing before making a purchase. Open bags of grommets may not be returned. Thank you.