Model #: 8680211767323
Unit of Measure: SET
Quantity Per Unit: 1
Minimum order: 1
Order Increments: 1
This all-in-one two-step grommet die acts as not only a hole piercing die, but also a grommet setting die. As a result, the CSDIE-PA is used to both cut a hole in your material and to attach ClipsShop #12 (40 mm) metal grommets. Equally important, the #12 grommets, which have a 1.5" (1-1/2"), (1 1/2) hole size inside diameter, are set faster and more accurately than with 2 separate dies!
- Gun Metal
- Antique Brass
- Copper Oxide
- Black Oxide
- Satin Nickel
- Satin Brass
Because of its unique features, this carefully engineered stainless steel grommet die will perform the job of 2 separate dies. You no longer need to cut the holes with 1 die, remove it from the machine, and then install the setting die. Consequently, the single die will pierce a hole in the material in the first step. Secondly, without changing dies or moving the substrate, it's then used to attach grommets.
This proprietary grommet die is a cost-saving tool since it replaces two separate dies. Also, the 2-step die should decrease the time it takes to set a grommet speeding up production. In addition, because the material remains in place for grommet attaching, the number of rejects and amount of waste should be reduced.
Top-notch workmanship, high-quality steel, special metal hardening for excellent cutting/attachment results and long life span.
Sized to easily accept the ClipsShop Large GrommetSniper alignment fixture.
The CSDIE-PA family of #12 grommet setting dies, 40 mm grommet dies and 1 1/2" curtain eyelet dies can easily attach #12 grommet through a pre-cut pre-pierced hole and is capable of cutting its own hole prior to setting the grommet.
Compatible with ClipsShop CSTIDY-51, CS-TIDY-41, CSBUR-1, CSTEP-2 and CSPIC-2 grommet attaching machines.
| • CS-TIDY-41
|| • CSTEP-2
|| • CSBUR-1
| • CS-TIDY-51
|| • CSTON-1
|| • CS-PIC-2
#12 brass metal grommets are NOT self-piercing. But the 2-step die simplifies the process of attaching a curtain eyelet without changing dies and without moving the material.
If you have ANY questions about use or compatibility, please let us know! Use the contact us form and reach out and one of our friendly customer service reps with get back to you quickly to help with the information/ advice you need.
Part #s and reference numbers associated with the CSDIE-PA family of #12 grommet dies for curtain eyelets with 1 1/2 hole size and 40 mm inside dimensions