#2 long neck grommets and washers, 500 pieces of each

Inside diameter: 3/8"
Flange diameter: 0.74"
Length under flange: 0.354" (9mm)

Note: ClipsShop #2 long neck grommets have the same hole size as a #2 grommet but they have a longer length under the flange for thicker material such as corrugated plastic, coroplast, foam board, and foam core. See the grommet chart for more size information.


You can apply this size grommet with the following machines:
CSTEP-1
CSTEP-2
CSTON-1
CSPIC-2
CSPIC-3

Note: Our ClipsShop brand grommets fit our ClipsShop brand dies. They have also been known to fit on certain Micron and Stimpson dies. Micron calls 3/8" ID grommets a #2. If you have an existing Micron #2 die then you should order our #2 grommets to fit it. If you plan on using our grommets with a different brand of machine, we suggest you request free samples for testing before making a purchase. Open bags of grommets may not be returned. If you have a Hiker hand press, please contact us about a special die adapter so you can apply our ClipsShop grommets with your Hiker hand press.

While the #2 long neck grommets are self piercing, it is strongly recommended that you pre-punch a hole. Without a prepunched hole you may crush your material if you are not careful. The grommets will pierce most materials but with a pre-punched hole you can avoid any crushing. Thank you.