Model #: 8680211767071 Unit of Measure: SET Quantity Per Unit: 1 Minimum order: 1 Order Increments: 1
Are you using an extra heavy material that is too thick to self-pierce? Are you using multiple layers of material making it difficult to self-pierce? Would you simply like to pre-punch the holes so you can better line up multiple pieces of material on the same grommet? Then the hole-piercing die is a perfect addition to your grommet equipment! This hole piercing die set is used for piercing the hole prior to setting a 1/8" (#XX00) grommet and washer. This die pierces holes only. The grommet still needs to be applied with a self-piercing die.
This die is compatible with the following machines:
| • CS-TIDY-41 |
• CSTEP-2 |
• CSBUR-1 |
| • CSTON-1 |
• CS-PIC-2 |
• CSTEP-1 |
Note: Our dies are made to fit our ClipsShop brand grommets machines. They are also known to fit the Micron brand as well. If you plan on purchasing a die to use with a different brand of machine, you do so at your own risk. Used dies are not returnable. Thank you.
CSHPD-XX00, 8680211767071
|
