Model #: 8680211767156-
Unit of Measure: SET
Quantity Per Unit: 1
Minimum order: 1
Order Increments: 1
Grommet cutter hole-piercing die to pre-pierce a hole in material prior to setting and attaching ClipsShop #12 (40 mm) metal grommets with the CSBUR-1 strong hand press. #12 grommets have a 1.5" (1-1/2"), (1 1/2) hole size inside diameter.
Note: #12 brass metal grommets are NOT self-piercing. Use this #12 hole cutting / piercing die (ClipsShop model CSDIE-12P) to cut a hole in the material before applying, setting or attaching the brass curtain grommets.
After the hole is cut in the material with this ClipsShop CSDIE-1P hole cutter die (or by some other method), then use the ClipsShop #12 setter / attacher die (Model CSDIE-12A) to set the grommets to the material. If you have another method to cut or pierce the hole in the material substrate prior to setting and attaching the grommet then the #12 cutting / piercing die is not required.
Regardless of how the hole is made in the substrate material, the grommet attaching setting die is used to attach and set ClipsShop #12 (40 mm) metal grommets. #12 grommets have a 1.5" (1-1/2"), (1 1/2) hole size inside diameter
This die will work with the following machines:
This die will NOT work with or fit the CS-TIDY-41, CS-TIDY-51, CSTON-1, CSTEP-2, CSTEP-1 grommet machines and presses.
Don't forget to buy grommets and to check out special savings on the package deal with the CSBUR-1 grommet attacher and #12 (40 mm) piercing and setting tools sold as a set.
Note: Our ClipsShop dies are made to fit ClipsShop brand grommets attaching machines. If you purchase a die and use it with a different brand of machine, you do so at your own risk. Used dies are not returnable. Thank you.