Model #: 8680211760607
Unit of Measure: SET
Quantity Per Unit: 1
Minimum order: 1
Order Increments: 1
Filter, regulator, lubricator (FRL) assembly for CS-TIDY-41 pneumatic grommet press including specially designed stainless steel mounting plate, 8mm black connection tube, 1/4" NPT air pressure quick-release sliding check valve, 1/4" to 8mm push to connect hose fitting, 1/4" to 1/8" reducer, 1/8" to 8mm push to connect hose fitting.
This Mindman FRL comes with a 1/4" NPT air inlet but ClipsShop has you covered just in case!
Prevent moisture & debris from a compressor's storage tank or airlines before they enter the CS-TIDY-41 and RUIN pneumatic components
Reduce the pressure of your house air - which is sometimes as high as 150 PSI - to below the maximum pressure for the CS-TIDY-41 to avoid damaging components
Regulate air pressure directly at the CS-TIDY-41
No fumbling with "quick-disconnects" which are prone to air leaks, difficult to use, and contribute to drops in air pressure. Use the quick-release slide value to cut off incoming air to the grommet machine and to discharge air in the cylinder
The press should be stored without air pressure when not in use
Machine adjustments should be made without air pressure
Die changes should be made without air pressure
CS-TIDY-FRL, 8680211760607, 8680211321839, 8680211760607