Model #: 8680211761550
Unit of Measure: BG
Quantity Per Unit: 100
Minimum order: 1
Order Increments: 1
#12 Nickel plated brass curtain grommets and washers with a satin finish, 100 pieces of metalgrommets and matching washers per bag. #12 grommets with 1 1/2" inside diameter hole size are most commonly used for curtains, drapes, truck covers, tents, tarps, awnings and other textile applications. 1-1/2" ClipsShop round metal drapery grommets will fit on most curtain rods up to 1 1/4" in diameter. All of our metal grommets are heavy duty solid brass and will not rust. How can you tell if grommets are made from durable, long lasting brass? If a magnet will stick to a grommet then it is made of steel. Steel grommets will rust. 8 stock finishes of corrosion resistant, non-rusting curtain eyelets available. If 100 grommets are too many for your project then buy a bag or three of 25 grommets to meet your specific needs here:
Click here to see a color chart of all 8 finishes available for our #12 curtain drapery grommets.
Grommet finish: Satin Nickel
Inside diameter: 1 1/2"
Flange diameter: 2.46"
Neck length: 0.41"
#12 curtain grommet are NOT self-piercing. You must apply ClipsShop brass metal curtain grommets through an existing hole in your material. Make the hole with one of our hole cutter cutting dies or the 2-step dies where you can cut a hole in one step, set the grommet in a second step without moving the material and without changing dies!
You can apply curtain and drapery grommet with the following machines:
#12 hand-setting tool
Check out our new 2-step cutting / attaching die to cut holes and set #12 grommets using the CSTEP-2 hand press!
This size grommet will NOT fit the CSTEP-1 or CSTON-1 stroking hand press.
Note: Our ClipsShop brand curtain grommets fit our ClipsShop brand dies. Many customers successfully use ClipsShop curtain grommets certain Micron and Rowley die and grommet setters. Micron and Rowley call 1 1/2" ID grommets a #12 or 40mm grommet or curtain eyelet. If you have an existing Micron #12 die or hand setting tool then you should order our #12 grommets to fit it. Happy ClipsShop customers also report success setting our 1-1/2" ID metal grommets with their Rowley grommet dies. If you plan on using our grommets with a different brand of machine, we suggest you request samples for testing before making a purchase. Samples of smaller grommets sizes are usually free. There may be a charge for samples of the #12 grommets. Open bags of grommets may not be returned. Thank you.
Alternate Part Numbers associated with this product: CSGSN-12 and #12 GWSN