Filter, regulator, lubricator (FRL) assembly for CS-TIDY-41 pneumatic grommet press including specially designed stainless steel mounting plate,  8mm black connection tube, 1/4" NPT air pressure quick-release sliding check valve, 1/4" to 8mm push to connect hose fitting, 1/4" to 1/8" reducer, 1/8" to 8mm push to connect hose fitting.

This Mindman FRL comes with a 1/4" NPT air inlet but ClipsShop has you covered just in case!

• Prevent moisture & debris from a compressor's storage tank or airlines before they enter the CS-TIDY-41 and RUIN pneumatic components

• Reduce the pressure of your house air - which is sometimes as high as 150 PSI - to below the maximum pressure for the CS-TIDY-41 to avoid damaging components

• Regulate air pressure directly at the CS-TIDY-41

  • Protect your work from damage

  • Use the appropriate air pressure to achieve the best results for your project

• No fumbling with "quick-disconnects" which are prone to air leaks, difficult to use, and contribute to drops in air pressure. Use the quick-release slide value to cut off incoming air to the grommet machine and to discharge air in the cylinder

  • The press should be stored without air pressure when not in use

  • Machine adjustments should be made without air pressure

  • Die changes should be made without air pressure

CS-TIDY-FRL, 8680211760607, 8680211321839, 8680211760607