Model #: 8680211765459
Unit of Measure: SET
Quantity Per Unit: 1
Minimum order: 1
Order Increments: 1
Grommet attaching setting die to attach and set ClipsShop #12 (40 mm) metal grommets. #12 grommets have a 1.5" (1-1/2"), (1 1/2) hole size inside diameter.
Note: #12 brass metal grommets are NOT self-piercing. A #12 hole cutting / piercing die should be used to cut a hole in the material before applying, setting or attaching the brass curtain grommets.
After the hole is cut in the material with the ClipsShop hole cutting die (or by some other method), then use this ClipsShop #12 setter / attacher die (Model CSDIE-12A) to set the grommets to the material. If you have another method to cut or pierce the hole in the material substrate prior to setting and attaching the grommet then the #12 cutting / piercing die is not required.
Don't forget to buy grommets and to check out special savings on the package deal with the CSBUR-1 grommet attacher and #12 piercing and setting tools sold as a set.
This die will work with the following machines:
This die will NOT work with or fit the CSTIDY-41, CSTON-1, CSTEP-2 or CSTEP-1 grommet machines and presses.
Note: Our ClipsShop dies are made to fit ClipsShop brand grommets attaching machines. If you purchase a die and use it with a different brand of machine, you do so at your own risk. Used dies are not returnable. Thank you.